Comment:	Cristian, QAP 147.490, ce3pcn@gmail.com Bat=3.34V (-87mA)
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	33°36.25' S 70°32.58' W - locator FF46RJ45TA - show map 4.0 km East bearing 70° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile [?] 8.7 km East bearing 105° from La Pintana, Provincia de Santiago, Metropolitana, Chile 19.0 km Southeast bearing 149° from Santiago, Provincia de Santiago, Metropolitana, Chile
Last position:	2025-10-11 20:24:14 UTC (2m16s ago) 2025-10-11 17:24:14 -03 local time at Puente Alto, Chile [?]
Altitude:	746 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	XQ3PCN-9>APLRT1 via WIDE2-2,qAO,XQ3PCN-10
Positions stored:	65714
Other SSIDs:	XQ3PCN-10 XQ3PCN-3 XQ3PCN-2 XQ3PCN-12 XQ3PCN-7 XQ3PCN-8 XQ3PCN-15 XQ3PCN-16 XQ3PCN-17 XQ3PCN-6 XQ3PCN-8 XQ3PCN-1

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.