Comment:	BTECH DMR 6X2
Location:	46°51.48' N 122°16.71' W - locator CN86UU65NW - show map 1.4 km Southwest bearing 221° from Eatonville, Pierce County, Washington, United States [?] 21.7 km South bearing 177° from Graham, Pierce County, Washington, United States 45.6 km South bearing 164° from Tacoma, Pierce County, Washington, United States 83.2 km South bearing 177° from Seattle, King County, Washington, United States
Last position:	2025-11-26 22:25:38 UTC (1d 8h39m ago) 2025-11-26 14:25:38 PST local time at Eatonville, United States [?]
Altitude:	185 m
Course:	205°
Speed:	43 km/h
Device:	BTECH: DMR 6x2 (ht)
Last path:	WW7CH-2>APBT62 via W7PFR-1,WIDE1*,qAR,K7NWS-2
Positions stored:	417
Other SSIDs:	WW7CH-D WW7CH-11 WW7CH-10 WW7CH-12 WW7CH-15

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.