Comment:	- Let's go Brandon!
Location:	42°41.46' N 89°02.34' W - locator EN52LQ55HU - show map 1.9 km Northwest bearing 299° from Janesville, Rock County, Wisconsin, United States [?] 12.2 km Southwest bearing 220° from Milton, Rock County, Wisconsin, United States 100.0 km West bearing 248° from Milwaukee, Milwaukee County, Wisconsin, United States 147.6 km Northwest bearing 310° from Chicago, Cook County, Illinois, United States
Last position:	2025-08-13 16:22:11 UTC (2d 5h16m ago) 2025-08-13 11:22:11 CDT local time at Janesville, United States [?]
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	WB9BBE>APX216 via TCPIP*,qAC,T2ALBERTA
Positions stored:	9
Other SSIDs:	WB9BBE-7 WB9BBE-N
APRS igate – Statistics for 2025-08:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-08-08 21:49:41 UTC (6d 23h48m ago)
Position packets heard directly:	2 on radio path
Position packets sent to APRS-IS:	2 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.