Comment:	WX3in1Plus2.0 U=11.7V,T=??.?C/??.?F
Location:	35°15.37' N 80°22.80' W - locator EM95TG41JL - show map 5.7 km Northwest bearing 306° from Oakboro, Stanly County, North Carolina, United States [?] 20.2 km Northwest bearing 322° from Burnsville, Anson County, North Carolina, United States 42.2 km East bearing 85° from Charlotte, Mecklenburg County, North Carolina, United States 105.1 km Southwest bearing 211° from Greensboro, Guilford County, North Carolina, United States
Last position:	2024-10-14 04:10:12 UTC (6m22s ago) 2024-10-14 00:10:12 EDT local time at Oakboro, United States [?]
Device:	Microsat: WX3in1 Plus 2.0
Last path:	W4DEX>APMI06 via TCPIP*,qAC,FIFTH
Positions stored:	47
Other SSIDs:	W4DEX-2 W4DEX-15
APRS igate – Statistics for 2024-10:
Stations heard directly:	160 on radio path – show map
Last heard a station directly:	2024-10-14 04:14:49 UTC (1m45s ago)
Normal receiver range estimate:	200 km (Updated: 2024-10-14 03:36:27 UTC)
Position packets heard directly:	9214 on radio path
Position packets sent to APRS-IS:	18231 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.