Location:	27°32.91' S 153°15.93' E - locator QG62PK18UI - show map 1.7 km South bearing 184° from Cleveland, Redland, Queensland, Australia [?] 6.0 km Northwest bearing 310° from Victoria Point, Redland, Queensland, Australia 25.1 km East bearing 111° from Brisbane, Brisbane, Queensland, Australia 52.8 km North bearing 342° from Gold Coast, Queensland, Australia
Last position:	2025-09-01 08:44:46 UTC (7h3m ago) 2025-09-01 18:44:46 AEST local time at Cleveland, Australia [?]
Course:	4°
Speed:	0 km/h
Device:	Unknown: Unknown
Last path:	VK4TJE-9>APRS via VK4RMC-3,WIDE1*,WIDE1-2,qAO,VK4MGO-10 If WIDE1-1 is used in the path, it should be the first component of the path, so that a fill-in digipeater would be the first one to retransmit the packet. Path element WIDE1-2 does work - please use WIDE1-1 instead. In path element WIDEn-N, n must be greater than or equal to N.
Positions stored:	59163

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.