Comment:	LoRa APRS, Fraser, ACT
Location:	35°11.47' S 149°02.62' E - locator QF44MT54FC - show map 4.6 km Northwest bearing 308° from Belconnen, Canberra, Australia [?] 6.3 km Northwest bearing 298° from Kaleen, Canberra, Australia 12.8 km Northwest bearing 323° from Canberra, Canberra, Australia 25.0 km Northwest bearing 317° from Queanbeyan, Queanbeyan, New South Wales, Australia
Last position:	2025-10-16 19:55:05 UTC (7m51s ago) 2025-10-17 06:55:05 AEDT local time at Belconnen, Australia [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	VK1JAM-10>APLRG1 via TCPIP*,qAC,T2PERTH
Positions stored:	1
Other SSIDs:	VK1JAM-11 VK1JAM-1 VK1JAM-GW VK1JAM-9 VK1JAM-2 VK1JAM-3 VK1JAM

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.