Comment:	LoRa APRS Tracker Ext=3.09V
Last status:	Tracker started QRG PL EU UK RX 439.9125MHz 300bps
Last beacon:	..::| Experimental Arduino-APRS |::..
Location:	51°26.08' N 9°09.27' E - locator JO41NK84MH - show map 3.0 km Northwest bearing 315° from Breuna, Regierungsbezirk Kassel, Hesse, Germany [?] 7.3 km South bearing 187° from Warburg, North Rhine-Westphalia, Germany 111.3 km South bearing 201° from Hannover, Lower Saxony, Germany 118.3 km East bearing 94° from Dortmund, North Rhine-Westphalia, Germany
Last position:	2025-11-22 14:27:27 UTC (22h35m ago) 2025-11-22 15:27:27 CET local time at Breuna, Germany [?]
Last telemetry:	2025-11-22 14:27:27 UTC (22h35m ago) – show telemetry V_Bat: 0 VDC, V_Ext: 0 VDC
Device:	Damian, SQ2CPA: LoRa APRS
Last path:	SP8OBQ-14>APLRFT via WIDE1-1,WIDE2-1,qAO,DO0SIB-10
Positions stored:	136951
Other SSIDs:	SP8OBQ-4 SP8OBQ-7 SP8OBQ-8

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.