Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account
Callsign, ship name or locator: Clear       
It is possible to search using wildcards (*?) after a prefix. Example: OH*
APRS station ON3ERI - show graphs
Comment: Stanby on ON0LTV & ON0LGE ID2060614
Location: 50°23.44' N 5°52.96' E - locator JO20WJ53WS - show map
2.3 km North bearing 20° from Trois-Ponts, Province de Liège, Walloon Region, Belgium [?]
5.6 km East bearing 109° from Stoumont, Province de Liège, Walloon Region, Belgium
96.4 km Southwest bearing 232° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany
119.6 km Southeast bearing 115° from Brussels, (Bruxelles-Capitale), Brussels Capital Region, Belgium
Last position: 2025-03-06 15:45:07 UTC (5d 9h55m ago)
2025-03-06 16:45:07 CET local time at Trois-Ponts, Belgium [?]
Altitude: 270 m
Device: Anytone: AT-D578 (rig)
Last path: ON3ERI>APAT51 via WIDE1-1,WIDE2-1,WIDE1-2,qAR,ON0LB-10 (bad)
This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE. If WIDE1-1 is used in the path, it should be the first component of the path, so that a fill-in digipeater would be the first one to retransmit the packet. Path element WIDE1-2 does work - please use WIDE1-1 instead. In path element WIDEn-N, n must be greater than or equal to N.
Positions stored: 97
Other SSIDs: ON3ERI-8
Stations which heard ON3ERI directly on radio –
callsign pkts first heard - UTC last heard longest (tx => rx) longest at - UTC

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.
About this site
This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.
User guide · FAQ · Blog · Discussion group · Linking to aprs.fi · AIS sites · Service status · Database statistics · Advertising on aprs.fi · Technical details · API · Change log · Planned changes · Credits and thanks · Terms Of Service · iPhone/iPad APRS