Comment:	APRS BRTNICE
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-08-04
Location:	49°18.72' N 15°37.49' E - locator JN79TH44XV - show map 3.8 km West bearing 279° from Brtnice, Vysočina, Czech Republic [?] 5.7 km Northwest bearing 323° from Kněžice, Vysočina, Czech Republic 72.5 km West bearing 281° from Brno, South Moravian Region, Czech Republic 122.2 km Southeast bearing 134° from Prague, Hlavní Mesto Praha, Czech Republic
Last position:	2025-09-01 17:56:21 UTC (9m47s ago) 2025-09-01 19:56:21 CEST local time at Brtnice, Czech Republic [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	OK6MS-10>APLRG1 via WIDE1-1,qAS,OK2PYA-2
Positions stored:	1
Other SSIDs:	OK6MS OK6MS-11 OK6MS-5

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.