Comment:	Radka + Anezka + Eliska Bat=4.19V (135mA)
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.07 DP_RSSI: -121 dBm DP_SNR: -1.00 dB DP_RSSI: -107 dBm DP_SNR: 4.75 dB
Location:	49°57.05' N 14°19.72' E - locator JN79DW98KF - show map 1.2 km Southeast bearing 148° from Černošice, Středočeský Kraj, Czech Republic [?] 3.0 km Northeast bearing 36° from Všenory, Středočeský Kraj, Czech Republic 16.6 km Southwest bearing 203° from Prague, Hlavní Mesto Praha, Czech Republic 140.1 km Southeast bearing 134° from Chemnitz, Direktionsbezirk Chemnitz, Saxony, Germany
Last position:	2025-07-08 12:25:06 UTC (2h18m ago) 2025-07-08 14:25:06 CEST local time at Černošice, Czech Republic [?]
Altitude:	219 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	OK1LCD-8>APLRT1 via WIDE1-1,qAR,OK1SE-12
Positions stored:	18558
Other SSIDs:	OK1LCD-3 OK1LCD-2 OK1LCD-9 OK1LCD-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.