Comment:	146.960MHz Mobilinkd w/ APRSdroid
Location:	45°17.25' N 122°32.15' W - locator CN85RG59QA - show map 46.9 m South bearing 198° from Beaver Creek, Clackamas County, Oregon, United States [?] 8.2 km Northeast bearing 26° from Mulino, Clackamas County, Oregon, United States 28.4 km Southeast bearing 157° from Portland, Multnomah County, Oregon, United States 40.2 km South bearing 166° from Vancouver, Clark County, Washington, United States
Last position:	2025-09-11 20:50:09 UTC (10d 9h48m ago) 2025-09-11 13:50:09 PDT local time at Beaver Creek, United States [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.0 m.
Device:	Open Source: APRSdroid (app, Android)
Last path:	N7JKF-9>APDR16 via WIDE1-1,WIDE2-2,WIDE3-1,qAR,HAPPYV This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE.
Positions stored:	106
Other SSIDs:	N7JKF-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.