Comment:	La Farge Fill In Igate
Last beacon:	Using IGate2
Location:	43°34.85' N 90°38.25' W - locator EN43QN39MJ - show map 19.4 km Southeast bearing 116° from Westby, Vernon County, Wisconsin, United States [?] 20.4 km East bearing 82° from Viroqua, Vernon County, Wisconsin, United States 54.2 km Southeast bearing 117° from La Crosse, La Crosse County, Wisconsin, United States 114.8 km Northwest bearing 300° from Madison, Dane County, Wisconsin, United States
Last position:	2025-10-18 16:35:10 UTC (13d 2h13m ago) 2025-10-18 11:35:10 CDT local time at Westby, United States [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.0 m.
Last path:	KC9MRV-4>BEACON via TCPIP*,qAC,THIRD
Positions stored:	2
Other SSIDs:	KC9MRV-10 KC9MRV-7 KC9MRV-D KC9MRV KC9MRV-12
APRS igate – Statistics for 2025-10:
Stations heard directly:	4 on radio path – show map
Last heard a station directly:	2025-10-18 16:27:20 UTC (13d 2h20m ago)
Position packets heard directly:	67 on radio path
Position packets sent to APRS-IS:	67 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.