Location:	39°06.81' N 76°52.56' W - locator FM19NC47VF - show map 4.9 km East bearing 87° from Burtonsville, Montgomery County, Maryland, United States [?] 5.8 km Southeast bearing 136° from Fulton, Howard County, Maryland, United States 27.9 km Northeast bearing 30° from Washington, D. C., Washington, D.C., United States 30.0 km Southwest bearing 229° from Baltimore, City of Baltimore, Maryland, United States
Last position:	2025-07-18 10:13:58 UTC (1d 5h47m ago) 2025-07-18 06:13:58 EDT local time at Burtonsville, United States [?]
Course:	223°
Speed:	119 km/h
Device:	BTECH: UV-PRO (ht)
Last path:	KC3QPN>APBTUV via KV3B-2,WIDE2,N3KTX-7,NJ3T-4*,WIDE2,qAS,K3MJW-10 This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE.
Positions stored:	405

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.