Comment:	LoRa APRS iGate & Digipeater
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-06-20
Location:	45°28.08' N 9°12.96' E - locator JN45OL52WH - show map 2.1 km East bearing 79° from Milan, Province of Milan, Lombardy, Italy [?] 9.2 km Northeast bearing 63° from Corsico, Province of Milan, Lombardy, Italy 127.5 km East bearing 69° from Torino, Provincia di Torino, Piedmont, Italy
Last position:	2025-08-01 05:18:00 UTC (4m40s ago) 2025-08-01 07:18:00 CEST local time at Milan, Italy [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IU2TVP-10>APLRG1 via WIDE1-1,qAR,IU2NYE-10
Positions stored:	1
Other SSIDs:	IU2TVP-11 IU2TVP-i IU2TVP-1 IU2TVP-2 IU2TVP-7
Last heard a station directly:	2025-07-20 10:00:39 UTC (11d 19h22m ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.