Comment:	Kevin on Tour, APRS Tracker t-beam, Low power test
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2024.11.13
Location:	49°06.45' N 10°59.06' E - locator JN59LC85CT - show map 837.9 m North bearing 5° from Pleinfeld, Bavaria, Germany [?] 5.2 km North bearing 343° from Höttingen, Regierungsbezirk Mittelfranken, Bavaria, Germany 38.3 km South bearing 189° from Nuremberg, Bavaria, Germany 116.2 km North bearing 338° from München (Muenchen), Regierungsbezirk Oberbayern, Bavaria, Germany
Last position:	2025-08-09 17:18:34 UTC (37m48s ago) 2025-08-09 19:18:34 CEST local time at Pleinfeld, Germany [?]
Altitude:	386 m
Speed:	5 km/h
Last telemetry:	2025-08-09 17:17:30 UTC (38m52s ago) – show telemetry V_Batt: 0 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DO6KP-9>APLRT1 via WIDE1-1,qAO,DO6KP
Positions stored:	21893
Other SSIDs:	DO6KP DO6KP-10 DO6KP-5

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.