Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	52°23.28' N 8°02.62' E - locator JO42AJ53FC - show map 4.3 km East bearing 108° from Bramsche, Lower Saxony, Germany [?] 4.6 km Northeast bearing 23° from Wallenhorst, Lower Saxony, Germany 105.0 km Northeast bearing 23° from Dortmund, North Rhine-Westphalia, Germany 125.8 km Northeast bearing 34° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-08-18 18:59:26 UTC (1d 21h7m ago) 2025-08-18 20:59:26 CEST local time at Bramsche, Germany [?]
Altitude:	63 m
Speed:	2 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL0GAS-11>APLRT1 via WIDE1-1,qAO,DB0DAM-12
Positions stored:	760
Other SSIDs:	DL0GAS-10 DL0GAS-1 DL0GAS-2 DL0GAS-3

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.