Comment:	X1C3 APRS TRACKER 5W CE4ERM 144.390 MHz 0006.1Km 4.5V S15
Location:	33°30.92' S 70°46.16' W - locator FF46OL76QH - show map 8.9 km Southwest bearing 207° from Lo Prado, Provincia de Santiago, Metropolitana, Chile [?] 10.6 km Northwest bearing 333° from San Bernardo, Provincia de Maipo, Metropolitana, Chile 13.0 km Southwest bearing 240° from Santiago, Provincia de Santiago, Metropolitana, Chile 20.6 km Northwest bearing 303° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile
Last position:	2025-08-26 10:24:38 UTC (31s ago) 2025-08-26 06:24:38 -04 local time at Lo Prado, Chile [?]
Altitude:	474 m
Course:	88°
Speed:	0 km/h
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	CE4ERM-7>APX1C3 via WIDE1-1,WIDE2-2,qAO,CE4ERM
Positions stored:	54382
Other SSIDs:	CE4ERM-10 CE4ERM-11 CE4ERM-1 CE4ERM-9 CE4ERM-D CE4ERM CE4ERM-13 CE4ERM-5 CE4ERM-15 CE4ERM-4 CE4ERM-3 CE4ERM-2 CE4ERM-6 CE4ERM-12

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.