Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	52°23.31' N 7°44.87' E - locator JO32UJ93RF - show map 2.2 km East bearing 75° from Recke, Regierungsbezirk Münster, North Rhine-Westphalia, Germany [?] 5.0 km South bearing 182° from Voltlage, Lower Saxony, Germany 99.0 km North bearing 12° from Dortmund, North Rhine-Westphalia, Germany 115.7 km Northeast bearing 25° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-11-10 15:13:06 UTC (3d 12h4m ago) 2025-11-10 16:13:06 CET local time at Recke, Germany [?]
Altitude:	38 m
Speed:	6 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL0GAS-10>APLRT1 via WIDE1-1,qAO,DM0DOS-12
Positions stored:	2360
Other SSIDs:	DL0GAS-17 DL0GAS-7 DL0GAS-11 DL0GAS-4 DL0GAS-8 DL0GAS-6 DL0GAS-5 DL0GAS-2 DL0GAS-1 DL0GAS-3

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.