Comment:	Arduino APRS Tracker LRBv1.3
Location:	32°49.56' N 116°58.60' W - locator DM12MT28TF - show map 1.4 km South bearing 191° from Santee, San Diego County, California, United States [?] 3.7 km North bearing 339° from El Cajon, San Diego County, California, United States 20.9 km Northeast bearing 54° from San Diego, San Diego County, California, United States 36.0 km North bearing 4° from Tijuana, Baja California, Mexico
Last position:	2025-08-14 20:41:59 UTC (21h3m ago) 2025-08-14 13:41:59 PDT local time at Santee, United States [?]
Altitude:	163 m
Device:	Unknown: Experimental
Last path:	KN6ZSV-12>APZMDM via WIDE1-1,WIDE2-2,qAR,KN6ZSV-4
Positions stored:	64
Other SSIDs:	KN6ZSV-4 KN6ZSV-4 KN6ZSV-5 KN6ZSV-15 KN6ZSV-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.