Comment:	PyMultimonAPRS iGate
Last status:	Running on Raspberry Pi with RTL dongle RX-Only 144.66MHz/1.2kbps
Location:	39°20.27' N 139°59.71' E - locator PM99XI91KB - show map 38.1 km North bearing 10° from Yuza, Yamagata, Japan [?] 43.3 km South bearing 192° from Akita Shi, Akita, Japan 43.7 km West bearing 254° from Ōmagari, Akita, Japan 141.0 km Northwest bearing 328° from Sendai-shi, Miyagi, Japan
Last position:	2025-09-21 16:55:56 UTC (3m41s ago) 2025-09-22 01:55:56 JST local time at Yuza, Japan [?]
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	JF7SGB-10>APPM13 via TCPIP*,qAC,T2SYDNEY
Positions stored:	13
Other SSIDs:	JF7SGB-9
APRS igate – Statistics for 2025-09:
Stations heard directly:	7 on radio path – show map
Last heard a station directly:	2025-09-21 16:58:25 UTC (1m12s ago)
Normal receiver range estimate:	50 km (Updated: 2020-07-31 23:26:26 UTC)
Position packets heard directly:	659 on radio path
Position packets sent to APRS-IS:	718 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.