Comment:	A RIPOSO
Location:	45°48.31' N 9°03.19' E - locator JN45MT63IG - show map 4.1 km South bearing 195° from Cernobbio, Provincia di Como, Lombardy, Italy [?] 4.3 km South bearing 174° from Maslianico, Provincia di Como, Lombardy, Italy 39.3 km North bearing 344° from Milan, Province of Milan, Lombardy, Italy 134.2 km Northeast bearing 52° from Torino, Provincia di Torino, Piedmont, Italy
Last position:	2025-11-23 20:48:36 UTC (19h3m ago) 2025-11-23 21:48:36 CET local time at Cernobbio, Italy [?]
Altitude:	385 m
Last telemetry:	2025-11-23 20:48:36 UTC (19h3m ago) – show telemetry Voltage: 3.910 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	IZ2DPX-7>APLRT1 via WIDE1-1,qAO,IW2HUZ-10
Positions stored:	11
Other SSIDs:	IZ2DPX-2 IZ2DPX-10

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.