Comment:	Arduino APRS Tracker
Location:	41°30.04' N 13°49.89' E - locator JN61VM90SD - show map 3.6 km Southwest bearing 209° from Sant'Elia Fiumerapido, Provincia di Frosinone, Latium, Italy [?] 6.4 km West bearing 287° from Cervaro, Provincia di Frosinone, Latium, Italy 82.0 km Northwest bearing 335° from Napoli, Provincia di Napoli, Campania, Italy 120.1 km East bearing 111° from Roma, Provincia di Roma, Latium, Italy
Last position:	2025-11-16 17:22:26 UTC (1h3m ago) 2025-11-16 18:22:26 CET local time at Sant'Elia Fiumerapido, Italy [?]
Altitude:	60 m
Speed:	27 km/h
Device:	Unknown: Experimental
Last path:	IZ0CWW-9>APZMDM via WIDE1-1,WIDE2-2,qAR,IZ0ANE-2
Positions stored:	14432
Other SSIDs:	IZ0CWW-12 IZ0CWW-B IZ0CWW-15 IZ0CWW-2 IZ0CWW-7 IZ0CWW-4 IZ0CWW-3 IZ0CWW

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.