Comment:	Burnsville, MN Buck Hill RX-only iGate
Last status:	APRS-RTL2TXCO-Pi4 iGate
Location:	44°43.56' N 93°17.15' W - locator EN34IR54QF - show map 4.7 km South bearing 188° from Burnsville, Dakota County, Minnesota, United States [?] 7.1 km Southeast bearing 146° from Savage, Scott County, Minnesota, United States 28.3 km South bearing 184° from Minneapolis, Hennepin County, Minnesota, United States 28.6 km Southwest bearing 212° from Saint Paul, Ramsey County, Minnesota, United States
Last position:	2025-11-23 01:15:59 UTC (4m3s ago) 2025-11-22 19:15:59 CST local time at Burnsville, United States [?]
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	AE0RF-10>APPM13 via TCPIP*,qAC,T2BC
Positions stored:	17
APRS igate – Statistics for 2025-11:
Stations heard directly:	7 on radio path – show map
Last heard a station directly:	2025-11-22 11:30:06 UTC (13h49m ago)
Normal receiver range estimate:	10 km (Updated: 2015-05-31 20:57:06 UTC)
Position packets heard directly:	15 on radio path
Position packets sent to APRS-IS:	20 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.